» Livestock »Beehive do it yourself

DIY hive

DIY hive
Dear site visitors, from the material presented by the author, you will learn how to independently make a beehive for bees from boards and OSB.

Beekeeping is one of the oldest professions of mankind, at first people just went to the forest, found beehives of wild bees in the hollows of trees, fumigated with smoke, and while the bees were confused, they took honey from them in wax combs. Over time, people realized that it was better to domesticate the bees and breed them in a separate apiary area, so the bees are safe and people always have plenty of healthy and tasty honey.

Bees, like people, need their own house, in which the colony lives, the bees are divided among themselves into a working bee and a soldier, the first work, collect pollen, make honey, soldiers protect the hive uterus and offspring from uninvited enemies. For bees, everything is coordinated and debugged; they work from sunrise to sunset.

The bee hive is quite simple in its design, namely, a wooden box with a removable roof-lid (one or two slopes). Inside there are frames with honeycombs, in the front part there is a door for the bees to fly out and fly in, it should also close and open (this is necessary for carrying and transporting the hive)

And so let's look at how you can make a hive yourself?

Materials

1. board 25-30 mm
2. rail
3. roofing material (soft tiles, tin)

Instruments

1. stationary circular saw
2. hacksaw
3. screwdriver
4. hammer

Step-by-step instructions for creating a hive do it yourself.

To make a hive is not so difficult in fact, the first thing to do is prepare blanks for assembling the box and a removable roof lid.







































Further, frames are made of reiki on which a wax is inserted, and then the bees make honeycombs and fill it with honey.





As you can see, the hive is not so difficult to make on your own, but the main thing is to choose the right material, in this case OSB is used that “not good” you need to take boards without impregnation and paint, so that there is an environmentally friendly house for bees. You can paint the hive only outside, to protect the wood from direct sunlight and precipitation.

The hive can be installed in the garden of a private house or cottages, the bees will actively pollinate flowering trees, flowers, etc., thus you will always be with the crop and honey.

Of course, bees are a peculiar people)) and once again it is better not to touch them;)

That's all, thank you all for your attention!
Come visit often and do not miss the latest in the world of homemade goods!
0
0
0

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
2 commentary
Author
They build frame houses from OSB, American technology, they like to build plywood houses that they blow down every year with hurricanes))) We also take root in this technology, build .. Warm houses are obtained due to the Thermos effect, that is, such a house does not breathe at all, a ventilation system is required.
OSB is used that “not good” you need to take boards without impregnation and paint
I wanted to write, and ALEKS888 himself indicated a drawback. And how is this material in thermal conductivity? All the same, we do not have California.

We advise you to read:

Hand it for the smartphone ...