This table was created with the intention of installing it in the fresh air, as a dining room for the whole family. At first, the author wanted to buy a similar table in a store, but when he saw the prices, he immediately changed his mind, because the prices were very high with the low quality of the product.
So the master arrived home and began developing his own table design, and free pallets and boards with timber available were used as material. Thus the table is made do it yourself It turned out almost free, and most importantly compact, neat and nice looking.
First, a 3D drawing was made in a computer program, then 8 pallets were found in the district, which were then sorted into separate planks and passed through a surface gage, sanded so that there were no burrs and other things.
And so, let's look at how to make a sliding table?
Materials
1. pallet 8 pcs
2. board 25-35 mm
3. screws
4. wood glue
5. varnish
Instruments
1. circular cutting saw
2. stationary circular saw
3. hacksaw
4. thicknesser
5. screwdriver
6. hammer
7. ruler
8. pencil
9. drill
10. brush
Step-by-step instructions for creating a sliding table with a do-it-yourself countertop.
At first, the author experimented a little with the design, and then specifically decided that the table should definitely be a folding table, here are the first photos.
A step-by-step instruction is presented to you, so we take and do it. Go for it friends!
That's all, thank you all for your attention!
Come visit often and do not miss the latest in the world of homemade goods!