I make a packing table for wrapping pallets. The principle is simple, a pallet with a load is installed on the turntable, next to a fighter with a manual dispenser filled with stretch film. The table is started from the pedal. The table starts rotation and wraps the film on the pallet until the load is properly packed.
The pedal seems to be not bad, but it occurred to me to mount an IR start / stop button or radio control button in the dispenser handle to start the packer.
The problem is that I can’t find a ready-made compact device for translating ideas into reality. Something in the form of a button with power, an IR transmitter, which can be mounted in a dispenser.
Apparently needed homemade for homemade ... in general, I hope for community ideas!
Dispenser handle - pipe D 23-25mm.