When in the garage there is a car the place to work is very small. It is worth putting something and there is no place at all.
It was decided to install a compact table, but the table interferes anyway. An ideal option was a folding table. Places takes a minimum.
Once dismantled an old wardrobe. The hand did not rise to carry it to the trash and not in vain.
For the table we need:
- chipboard;
- a pair of loops;
- wood screws;
- corners;
- furniture mortise nuts;
- bar for legs;
- anchor bolts;
- bar support.
First of all, mark the level of the table. The markup is performed using the level. Be it ordinary building or water from a water pipe. I applied the latter. I outlined two points and, having attached a bar, marked out the line along which I will screw it.
We drill through holes in the bar and fasten it to the anchor bolts.
Next, we mark on the bars for legs, places for installing corners. Corners are also taken from the old cabinet. There are two holes in the corner. One round, the second with a cut.
Round will be mounted on the legs of the table.
Corners will be screwed onto furniture nuts. The nuts were all unscrewed from the same old cabinet.
We drill holes and screw the nuts into the bars of the legs.
Similarly, we mark the holes in the countertop. Screw the nuts.
We fasten the loops to our bar. First we fasten on the bar, and then we attach the tabletop and fasten the loops to it.
This is what the screwed legs look like. To remove them, it is enough to twist the screws and legs a couple of times. The screws do not completely loosen. The screws are taken from the same cabinet and have a countersunk head.
So that our table in the folded state holds and does not fall, we need to mount it on the wall. To do this, take a small bar. Mark the holes on it and fasten it to the wall.
In the role of holder, we will have an ordinary latch.
This is how the table is kept folded and takes up almost no working space in the garage.
The legs are removed and set aside.
This is how the table looks unfolded.
In conclusion, I note. Almost all the main parts of the table were taken from an old cabinet. Which was not thrown out, but carefully stood in the corner and was waiting in the wings, now its time has come.The table can withstand a weight of about 85 kg, I think a hundred can withstand)
Detailed assembly instructions, as always, can be seen in the video: