» Homemade homemade »Homemade exclusive branch handle

Homemade exclusive branch handle


Today I am going to show you how to make an exclusive handle from a tree branch.

Materials and tools:
1. Screwdriver
2. Awl
3. An unnecessary but valid rod from a ballpoint pen
4. Colored pens (for spelling words)
5. The pencil is simple
6. Knife
7. Scissors
8. Drill
9. A suitable branch from a tree.


1.Step. We sharpen the end of the twig so that it is like a regular pen. As shown in the photo.


2.Step. We begin to drill a hole under the rod from the ballpoint pen. To do this, we take an awl and pierce in the center, and then we begin to drill a hole. As shown in the picture.

3. Step. Insert the rod into this hole.


4.Step. Then we take a knife and sharpen it, or how to say, well, okay, everything is shown in the photo.

5.Step. We take any colored pen or burner and write something well for ourselves. For example, I wrote the name of my village.

Well that's all we made a simple exclusive pen do it yourself . This pen can also be varnished to protect it from the environment. And you can also make it from a more beautiful tree such as alder.
0
0
0

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
5 comments
well, they grow thick on the bushes in the hand) And so full of young branches just in diameter are suitable for the handle, even.

So elderberry branches are thin
I don’t know the nut, but inside the elderberry there is "polystyrene". You pick it out and the handset is ready.
Author
Well done .
Take a nut branch. It is hollow inside and it does not need to be drilled. I made pencils out of a nut. Diameter up to 5 cm, rod from graphite rod (from a tram depot). Koru removed and covered with varnish or stain.The opposite edge was cut at an angle and made the inscription "gold". Made as a gift about 20 years ago. Piece 30 did, gave away everything.

We advise you to read:

Hand it for the smartphone ...