» Fishing »Holder for fishing rods, spinning rods

Holder for fishing rods, spinning rods

Holder for fishing rods, spinning rods

Hiking often decided to get a chic chair to contemplate the beauty of nature, so that it’s comfortable and a seagull in my hand ......

And here, on occasion, friends gave 2 fishing rods (5 and 7 m). So I decided, to add to my fishing trips, to complete the sensations. But the first fishing was very tired, because I’ve caught it from the bridge, and you won’t stick the staghorn into the bridge, although you have cut branches, a whole cart. In general, upon reflection at home, I decided to make fasteners to my favorite chair.

I went to the nearest plumbing store and bought 2 tees for sewage 40mm * 40mm at 70 rubles apiece (it is imperative that the rubber bands are present inside, otherwise it will not be firm) and 4 latch fasteners with a diameter of 25 mm at 13 rubles apiece.

Fortunately, the house was strewn on the balcony with 2 pieces of plastic pipe 40-ki 10 and 16 cm long, remaining after the repair.

Having inserted pieces of the pipe into the tee in the outlet channel (you can put it on glue, on some PVC materials), I just forcefully put the pipe into the tee, the rubber band did its job, it turned out very durable, but on the other hand, screwed the fasteners through the tee through with short bolts with a washer (for greater confidence in the reliability of the fasteners). And tightened everything with pliers, because keys in a narrow pipe can not be reached. The latches are very easy to install on any metal part of the chair, turn in any direction, but to remove them, you need to make an effort. It turned out such a miracle:



Attaching it to my favorite chair and having tested it, I was very satisfied with what was done. The design turned out to be very strong and easily switched to other directions.





The time spent on the manufacture of fasteners for fishing rods and spinning is 15 minutes + 30 minutes, the road to the store and back. The amount spent is 192 rubles. p.s. bought "just in case of fire and such fasteners

But for a very long time it has been put, albeit much stronger. I think I’ll fit it somewhere, I still have a backpack and straps on my chair, so that it would be more convenient to carry it over long distances. Good luck and good cool !!!!!
9.8
10
10

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
2 commentary
Author
Rods don’t shake at all if you don’t jump on the chair. Yesterday I was fishing from the bridge very shaky, there was a little movement of fishing rods, or rather spinings during my turns and movements, because of the bridge, and so ..... they are very very stable and stable in oarlocks. I have already replaced the upper holder, with a wing, clamping one, you can put a fishing rod of any weight, it will not tear, even with a very strong bite. You don’t have a tail or a husk .......
Are the rods shaking with the chair or separately?

We advise you to read:

Hand it for the smartphone ...