» Topics » Questions »Neon starter lamp. Marking?

Neon starter lamp. Marking?

Who knows how neon lamps are marked on Soviet starters of fluorescent lamps? Need IN-3 or ANN-1. Isn't the lamp so random on the starter?
Question \ topic is automatically published in the social. site network - stay tuned for answers there:

Suitable for topic

Related topics

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
8 comments
There are no markings on them, the parameters are not standardized, they float a lot.
Author
So this goodness in electric kettles, irons, coffee makers, light switches, etc. ...
- understood thanks
pogranec
but we have nowhere to buy
So this goodness in electric kettles, irons, coffee makers, light switches, etc. ...
Judging by the data from the old directory, neonka IN-3 (decoding (old) Indicator, Neon)) without a base. Discharge voltage 85 V, permissible current 0.2 mA. And according to her parameters, almost from top to bottom, neon TN-0.2-1 and TN-0.2-2 correspond, but they are with a base.
Author
They are worth a penny, but we have nowhere to buy. By mail only.
I just found it in the old directory. The types of bulbs indicated in the question are neonki without bimetallic contacts, therefore, they are definitely not in the starters.

Later I will compare the parameters with the neon TH, maybe it will be possible to use them.
On the bulbs themselves, I have never seen markings. Dismantled starters and domestic and imported. Light bulb and parallel to it capacitor. And the principle of its work, in general, is correctly described.

By the way, I came across lamps where the starter is inside. Not in the tank itself, of course. And I had to buy a new lamp. The only consolation was that such lamps worked for 5 years, almost continuously.
This is not quite an ordinary neon, it operates in an arc discharge mode: the arc heats the bimetallic plate, and from the inside it closes the lamp leads ... if you limit the current through the lamp to very small values ​​(0.3-0.5 mA), then a hot arc discharge will turn into a cold smoldering ... The ignition voltage of the lamp is usually not more than 100 volts, the damping voltage is about 40-65 volts
Something like this...

We advise you to read:

Hand it for the smartphone ...