LEDs

I have a lamp hanging over the kitchen table with a bagel-type energy saver: power - 24 W, lampholder - E27. As the manufacturer (respected OSRAM company) assured, it will last at least 15,000

Lighting in the country, I have long wanted to do. It’s too early to do something stationary: you still need to do (as I planned) a garage, put the site in order, etc. And without light, when it gets dark

This quartz crystal was presented to the master for his birthday. The crystal is beautiful, but it will be much more interesting to make a lamp out of it. Tools and materials: -Quartz; -Controller with remote control;

It was time to think about a synthesizer, a place for which is also provided in the office. Sockets had already been installed under it during the first repair to the right of the computer desk. It remains to figure out how

In this article, the Wizard will show us how to make a lamp with a tank filled with saline, which acts as a switch. The lamp lights up in horizontal

Video: Greetings to all readers, authors, and other visitors to bgm.imdmyself.com. Today I will share the instructions for making a table lamp in the form of a prism. Address will be the basis

Greetings, the inhabitants of our site! From this article you will learn how to make, perhaps, the most epic lamp of those that you can easily assemble with your own hands at home, so to speak “on the knee”,

Well, you won’t get up and go to the chandelier switch to find the right book on the shelf. Therefore, I decided to make LED (as the most economical) backlight. What was available for this:

Black suit, white shirt, black sunglasses, memory eraser and you are ready to save the world. This memory eraser was made for going to a costume party. For assembly

(shot with reduced exposure) A lamp with two energy-saving lamps of 15 W each was installed on the balcony ceiling. Everything seems to be nice if it were not for the heating of the lamps (especially in the cold

The "branded" Chinese light bulb burned out in the bathroom above the washing machine - it got a little dull. You will not turn on the main lighting in the bathroom to load / unload the laundry from the washing machine.

In this article, the Wizard will tell us how to make an RGB LED panel for photo / video shooting. A key part of the panel is the diffuser sheet from a broken laptop screen. His

The homemade product developed by Instructables author under the nickname brianpxbd automatically controls the brightness of the backlight of the alarm clock depending on the ambient lighting. The device is powered by a secondary winding

In this article, the Master will share with us how he made a huge Christmas tree from LED garlands. The question is not how to assemble and connect the garlands, the question is how to