Furniture

An original table with legs of a variable shape and a countertop filled with epoxy resin was made and presented to the review by the Master. For its manufacture, he used the following Tools and

It was time to think about a synthesizer, a place for which is also provided in the office. Sockets had already been installed under it during the first repair to the right of the computer desk. It remains to figure out how

How I wanted to make my office, where you can not only work, but also relax. My wife offered to buy some cabinets and a sofa (I already had a computer desk). But I replied that we would not find

Hello dear residents of our site and guests of this site! In this article I will tell you about how I made a shelf in the kitchen for a microwave and breadbox. The shelf will be made of chipboard. For

This mirror, several years after purchase, stood by the master idle. Once again having encountered him in the pantry, he decided to make a dressing table and install this mirror in him. Tools and

Hello, dear readers and residents of our site! Each of you has an individual design in your house, in which very unusual solutions are often applied. In this article, the author of YouTube channel 'Rag' n '

In this article, the wizard will tell us how he optimized the space behind the wall of the refrigerator. A pull-out shelf is the best option for such a small space. Tools and

Hello, dear readers and residents of our site! Surely almost every one of you loves beautiful furniture, especially if it is handmade. In this article, the author of YouTube channel “Rag 'n' Bone

In the office you need not only to work, but also to relax - I think so. Indeed, after a long sitting at the computer, when the brains are already buzzing with tension, I want to close myself from all my home ones,

Want to surprise your guests? Then read this article. In it, the master will tell how she made a frame of PVC pipes and decorated it under a chair. Tools and materials: - PVC pipes; -PVC fittings;

The master had an old office chair of the mid-20th century. The back of the chair was missing, the seat was dilapidated, and then he decided to restore it. Tools and materials: - Plywood 5 mm;

The Meander corner shelf, proposed by Instructables under the nickname AMbros Custom, is a good present for the developer of any technique that uses rectangular impulses in one way or another. Master

The master made this folding bed for his grandmother. The dignity of the bed in its ability develops, and the use of a bed of textile slings allows you not to use

Hello, dear readers and residents of our site! Many of you have a garage, or a small workshop, and there is a need to store long and heavy objects in it. Quite suitable for this