Good day, dear users! In this article, I would like to bring to your attention a set of two devices, the first of which is called a mechanical stapler and is intended for fastening various elements by clogging the brackets, and the second is a tool for removing these brackets without damage. This set is sure to come in handy when fixing insulation, assembling different packaging structures, upholstery of furniture, the installation of greenhouses and greenhouses, the fastening of posters and murals, wall and floor coverings, cables and wires, as well as various finishing and installation works, and of course - it will come in handy in the manufacture of various homemade.
The device works with three types of brackets:
- П - shaped (height: 4 - 14 mm., Width: 11.3 mm., Thickness: 1.2 mm.);
- U - shaped (height: 10 - 12 mm., Width: 6 mm., Thickness: 1.2 mm.);
- T - shaped (height: 10 - 14 mm., Thickness: 1.2 mm.).
Equipment:
- mechanical stapler;
- tool for removing staples;
- 600 pcs. (in a cheaper version - 300 pcs.) U - shaped staples (8 mm.);
- 300 pcs. U - shaped staples (12 mm.);
- 300 pcs. T - shaped staples (10 mm.);
- case for storage (in a cheaper version it is absent).
Cost: ~ 1478