» Aliexpress » Electronic components »Boost Module SX1308

Boost Module SX1308


Boost Module sx1308. It is high-frequency, and therefore differs in small size, attractive price and low idle consumption.

Frequency 1.2 MHz
95% efficiency
The circuit has short circuit protection, overheat protection function
10k adjustable potentiometer, output voltage adjustment
Maximum input voltage: 2-24 V DC
Maximum output voltage: 2-28 V of a direct current
Maximum output current: 2A

Cost: ~ 31

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
3 commentary
Well, I don’t know, it needs to be a whole study. I was specifically interested in the question of how the module holds voltage. The goal is to replace the expensive Krona in measuring instruments with a pair of ordinary finger batteries. Look on the Internet, there will probably be something there.
And efficiency = what?
And what is the output? What kind of interference? What can be connected except for a bulb?
The package arrived pretty quickly. The SX1308 module made me happy. Gathered a small stand for verification. I applied 3 V to the input, set 12 V at the output with a trimming resistor. The output was loaded with a 220 Ohm 2 W resistor. The voltage did not subside. He smoothly raised the input voltage to 10 V, the output voltage increased by only 0.08 Volts. A very good result for such a crumb! Ali Bastre, Stary Oskol, 15,11,2019

We advise you to read:

Hand it for the smartphone ...