The threaded inserts are made of brass and are intended both for hot pressing (fusion) and for installation in pre-prepared holes - drilled or pre-designed on 3-D models, in soft materials (most often in different types of plastics). Be sure such bushings are useful when assembling various housings, fixing parts to each other, as well as repairing, because very often connections on self-tapping screws (especially those that have to be regularly assembled and disassembled) lose their durability over time.
Two delivery options are available to order - 200 pieces (20 pieces of each type) or 500 pieces (50 pieces of each type). The inserts are packed in a transparent plastic container with a latch, on the cover of which there is a memo on the size of the inserts in each cell.
The set includes threaded inserts in the following sizes:
• M2x3;
• M2x4;
• M2x5;
• M2x6;
• M2.5x3;
• M2.5x4;
• M2.5x5;
• M2.5x6;
• M3x4;
• M3x5.
It should be noted here that sometimes the actual dimensions of some bushings may differ from the declared ones, so it is recommended that control measurements of the dimensions of a specific specimen be made before placing holes under them (when installing "on a cold").
In general, this acquisition will be more than successful. They perform their insertion functions with dignity, they are made with high quality. Especially they will be appreciated by amateurs to make various elements on a 3-D printer. It should also be noted that the acquisition of 500 pieces is more profitable.
Cost: ~ 270