» Topics » DIY ideas »Adjustable temperature sensor

Temperature sensor adjustable


I needed an indicator to turn on the engine cooling fan IZH-Planet-5
Temperature sensor that can be adjusted to the response temperature. I took the temperature sensor from the GAZ 21 TM-101 as a basis. it is he in the photo. I disassembled it, removed the element, cut off the excess, left only the tube, made a contact pad and drilled a hole for adjustment. I inserted the element back and filled it with epoxy resin. The result was an adjustable temperature sensor. Now you can fasten it to the engine and, depending on the installation location, adjust the response threshold. The sensor circuit in Figure 3 and what happened in photo 2. The control threshold (bolt 4 in Fig. 3) turned out from 90 g to 350 g

Temperature sensor adjustable
Question \ topic is automatically published in the social. site network - stay tuned for answers there:

Suitable for topic

Related topics

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...