Almost every master tries to invent tools for personal use, but often you get such a "work of art" that you want ... well, in general, see for yourself.
In this article, the author of the YouTube channel “SL Sanda”, will tell you how he ruined a bunch of scrap metal using a grinder and welding.
Materials
- Profile pipe
- Extra long bolts
- Nuts.
Instruments, used by the author.
—
- Cutting and flap scraping discs
- Vise, hammer, marker
- Equal hands, an empty skull box.
The process of bullying materials.
In fact, the author will need three long bolts and six nuts for this.
He lays them out with such a specific “spider”. Yes, three-legged.
For the reason that he does not have an education in terms of geometry, he has to do the marking on the profile pipe manually. Yes, he also does not have a goniometer, with his help he would set the angle to 60 degrees much more accurately.
Next, he will need to fix and cut the marked profile pipe with a grinder.
Well, of course, you definitely need to remove the burrs.
Now it is possible to weld the workpieces into such a triangle.
Two nuts are screwed onto the bolts, and the first nut is welded to the corners of the triangle. The author was clearly not taught safety, and he was not at all sorry for the fingers.
All three corner nuts are stuck, now he fixes the nut between the bolts. After that, the remaining three nuts are welded. Poor metal, from it already the smoke went.
Yeah, and here is the test bolt with a nut. I thought a much fatter class of this family would be introduced.
The author is on the joys of the manufactured fixtures showed as much as two likes.
And here is the first jamb. Even on a patient fixed in a vice, a key is not worn.
It has to be turned upside down. And now the question is, how to unscrew this ... er ... tool normal nuts in the corners or in hard to reach places?
Well, now that everything is fixed, you can see how this device rotates by inertia.Just like in that joke about an optimist and pessimist doctor “is it not worth it? but how it turns! ”
I thank the author for a very funny and useless idea for throwing it in the trash! Do not repeat such brilliant ideas that will be sent to Dr. Dew. By the way, this is a very interesting channel on Youtube.
And the right masters use these adjustable torque wrenches.
All good mood, good luck, and interesting ideas!
Author video can be found here.
[media = https: //www.youtube.com/watch? v = F8oKj7JRX-Q]