In this article, we will look at how to make a table lamp with an Edison lamp in a minimalist style.
Making a lamp does not take much time, the master spent 3 hours on it.
Tools and materials:
-Light bulb;
-Cartridge;
-Button switch;
-The wire;
-Fork;
-Board;
-Drilling machine;
- Set of Forstner Drills;
-Band-saw;
-Band-grinding machine;
-Soldering iron;
-Hair dryer;
-Hammer;
-Chisel;
-Pencil;
- Thermogun;
-Heat-shrink tubing;
-Glue;
Step One: Drawing
Makes a drawing of a lamp. Prints it on paper. You can download the drawing.
Step two: lamp housing
Slices three wooden squares. Glues them.
Sticks a template to the blank. Drill holes.
Crops according to the pattern.
The bottom of the case makes a channel for the wire.
At the end of the case, drills holes for the wire.
Step Three: The Electrical Part
The electrical circuit is simple: plug-breaker-cartridge. The wires are soldered to the contacts of the switch. In the channel, the wire is fixed with hot glue. Gathers a fork.
The table lamp is ready.