» Aliexpress » Tools and fixtures »Clamping chuck 0.3–4 mm per motor shaft

Clamping chuck 0.3-4 mm per motor shaft


Clamping chuck 0.3-4 mm with a key and a shaft 3.17 mm 1/8 "electric motor - easily turn the motor into a micro drill.

Features:
Clamps drills up to 4 mm, minimum drill 0.3 mm

Instruments
100% brand new high quality product.
Shockproof
High precision thread and tapered bore
Compatible with impact drill and different power of electric motors

Parameters:
Material: High Carbon Steel
Outer Diameter: 21.5mm
Cone: 2 degrees 49 minutes 24.7 seconds
Work with 0.3-4 mm (0.01 "-0.3"),
Maximum clamping diameter: 4.2 mm.
Connection size: JT0 (inner diameter of the hole is 6 mm)
JT0 Cone Largest End Diameter: 6.350 mm
JT0 cone the smallest end diameter: 5.800 mm
3.17mm Brass Mini Motor Shaft

Features:
3.17 mm motor shaft for clamping drill chuck

Cost: ~ 291

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...