The hacksaw is made of aluminum alloy and is a solid frame reinforced with stiffeners. Weight device significantly reduced due to the lightweight handle and is only 200 gr. The saw lies well in the hand and does not slip out (the handle is covered with tenacious rubber). Due to the thoughtful design of the hacksaw, a very comfortable grip is provided, and therefore the range of movements during operation. The result is much more even and clean than that of a dremel or a jigsaw. The sawing process takes place almost effortlessly. The hacksaw is equipped with a blade made of M42 high-speed tool steel (24 teeth per inch) for metal. We also note that this canvas is great for working with wood or plastic. So, for example, with it you can easily cut the required workpieces from skirting boards, rods, pipes or profiles.
It should be noted that only saw files for a manual jigsaw with a screw mount of 150 mm are used as the blade (others simply will not be fixed). You can clamp the cutting blade in several positions (it is possible to adjust the blade angle in increments of 60 degrees), just loosen the fixing screw. When replacing the files, the procedure is the same.
Compact (the dimensions in the picture below) and a convenient fixture both for a hobby and for small-sized garden, installation or repair work. Cloths for this hacksaw can also be easily found on Ali at a fairly low price.
Cost: ~ 509