» Aliexpress » DIY materials »Shrink with large diameter

Large diameter heat shrink

Large diameter heat shrink

The scope of the heat-shrink tubing with a large diameter is wide, but most often it is used to isolate the battery or give an aesthetic appearance to old batteries with a worn coating.

Shrink characteristics are as follows:

• shrink temperature: 80 ° C;
• operating temperature range: from-40 ° C to 105 ° C;
• shrinkage coefficient: ~ 2: 1;
• operating voltage: 300 V;
• color: blue.

Note that after shrinkage, a small seam remains.

Shrink tubes of the following sizes are available to order (length x diameter):

• 2000 mm x 30 mm;
• 1600 mm x 50 mm;
• 1400 mm x 58 mm;
• 1000 mm x 68 mm;
• 1000 mm x 85 mm;
• 1000 mm x 105 mm;
• 1000 mm x 110 mm;
• 1000 mm x 120 mm;
• 1000 mm x 130 mm.

Shrinkage is very cheap and at the same time quite high-quality and durable, and a low shrinkage temperature will make it possible to carry out work with an ordinary lighter in case of urgent need.

Cost: ~ 100

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...