» Topics » Advice »Powerful PVC pipe clamp

Powerful PVC pipe clamp


There are never too many clips-))) Of course, you can buy clips in the store, but you can make them yourself, as the master did.
To make a clamp, you need a PVC coupling and a threaded rod. Of the tools a hacksaw, drill, marker.
Instead of the coupling, you can use a pipe, but the clamp will be weaker.

So, we cut the coupling across. We drill a hole. We insert the rods.






The clamp is ready.

Checking the clamp for compression showed 36, although it is not clear in which system the master measured.


If necessary, you can make the clamp even more powerful.


Suitable for topic

Related topics

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
3 commentary
Such a clamp does not work as it should. It has been tested for a long time. And there is even a way out. It is necessary to add lock nuts and thumbs. Then it works. At first it’s not convenient, but you get used to it. Especially when the clamps end.
And what didn’t you like link to your text page? Everything is shown and better than watching a video.
If you take an article from another site, please leave a link to the video!

We advise you to read:

Hand it for the smartphone ...