Hello dear modelers.
Today we will focus on the model of a flying aircraft carrier from the movie Avengers.
I want to continue my stories about the models that my friend built, I showed you many of them.
First of all, these models are the figment of the imagination of the authors of the film, directors of artists and it is simply impossible to fully realize their fantasies.
Of course, what I am talking about is the result of tremendous work, and my comments cannot fully illuminate the entire manufacturing process of this model.
Do not be lazy, go to the source of my article, and feel the full scale and complexity of the construction of this model.
Herself model , really impresses with its dimensions 1250 X 840 mm. and it is built according to the X-quadric scheme.
The author at the very beginning of the work, drew patterns on pieces of old wallpaper.
The aircraft carrier model has two asymmetric decks located diagonally in relation to each other. One runway runs throughout the aircraft carrier’s hull, another crosses it in the stern area.
Since the model is large, the author, for the convenience of construction, divided the model into two bow and stern.
I had to slightly increase the size of the rings for the screws.
Top and bottom view.
The estimated total weight of the model is 1100g.
The height of the rings is 60 mm. The engine, together with the screw, is mounted inside the ring, on glued rails.
The bow and stern are connected, in the middle two longitudinal stiffeners are added, on which the aircraft carrier will be mounted in the future.
The model begins to appear the shape of an aircraft carrier.
Another author has already built a similar apparatus.
On the perimeter of the deck, bumpers are installed.
The lower part of the case is mounted, which at the same time serves as a chassis.
The sides along the perimeter of the deck are installed. He closed the lower part, which simultaneously performs the role of a keel and the lower wheelhouse of the carrier.
Sheathing is carried out.
The stern of the aircraft carrier is like that of an ordinary ship, and the upper deck hangs over the stern, for the author it looks a little different.
Covering the bottom.
The equipment is mounted, balancing is carried out in accordance with the location of the central heating model.
Cut holes for air and water intake.
“The bottom will be flooded. When landing on water, ballast will be automatically collected to simulate precipitation. When taking off, the water will have to flow out in the reverse order, freeing the apparatus from the ballast. ”
The cabin is mounted.
The upper runway is mounted, painting is carried out.
A number appeared on the model, further detailing is carried out.
Marching engines are installed.
Traction capabilities of engines are tested.
At the moment, the take-off weight is 1200g.
The weight of the model increased to - 1700 g.
The final video.
These are such amazing, unique models that my friend creates.
I told everything about this model that I know myself.
Until next time, your Valerian.