Such tweezers are perfect for all kinds of small work from modeling to repairing electrical appliances or creating homemade using electronic components. The main feature of the tweezers design is the presence of a conveniently located latch with a stroke of ~ 18 mm, which allows you to fix the tips of the tweezers in a reduced state. It should be noted that the lock stroke is rather tight. The latch itself is held onto the tweezers by means of a screw, the unwinding of which is prevented “out of the box” by reinforcing this threaded connection with a thread lock. The steel of which the tweezers are made is quite stiff and at the same time spring well (according to the seller - stainless). The tweezers are magnetized, but very weakly. The tweezers are 163 mm long and weigh approximately 27 grams.
The tweezers tips deserve special attention - they are very even, sharp, do not bend at work and, most importantly, are reduced without deviations relative to each other. Another interesting feature is the presence of a working part of the tweezers of a rhombic notch applied to a length of 15 mm, which prevents the elements from slipping out. The maximum dilution of the tips is about 10.8 mm. The seller has two types of tweezers: with curved and straight tips. Tweezers are supplied in a case, the tips are additionally protected by a plastic casing.
In general, the tweezers are made with high quality, its surface is polished, all sorts of burrs and burrs are absent. The tool is pleasantly in the hand and it is a pleasure to work with it. In addition, the price of this product is absolutely low, which does not go for the sake of quality, and certainly such tweezers will be much better than many similar ones at a price of ali.
Cost: ~ 126