» Joiner »Simple wooden stand for a smartphone and tablet do it yourself

Do-it-yourself simple wooden stand for smartphone and tablet

Hello dear readers andthe inhabitants of our site!
Almost every one of you uses smartphones and tablets, and often there is a need to watch a video on it, or chat in video mode with friends.

In this article, the author of the YouTube channel "KJDOT" will tell you how to make the simplest stand for such gadgets.

Everyone can repeat this homemade product, and on the eve of the new year, it will be a wonderful homemade gift for people close to you.

Materials
- Board cut
—  Oil wax
- Sandpaper.

Instruments, used by the author.
- Vise
- Hacksaw, knife
- Ruler, square, pencil.

Manufacturing process.
For the stand, the author will need to trim the board 15 mm thick and 35 mm wide. The variety of wood can be any, but it is better to choose solid varieties of wood, they have a very interesting texture, and a beautiful appearance.

On two sides, he marks two future grooves for gadgets. Their width is selected for the specific thickness of the device.

On the one hand there will be a wide cutout for the tablet. Using a hacksaw, two cuts are made according to the marking at half the depth of the board at an angle of about 25-30 degrees.


Now, on the second side, cuts are made for the phone. If the board was too long - it needs to be cut.


Using a sharp knife or chisel, excess material is removed from the grooves.



It should be such a blank.

Further, all its surfaces are polished with sandpaper, and the edges and corners are rounded off.



It remains only to apply a layer of oil-wax. If you do not have this, then you can use a household hairdryer, heat the surface, and rub it with a wax candle. Excess impregnation is removed with a rag.


This is how conveniently the phone is installed.


This stand holds even a large tablet. In addition, it weighs very little and fits easily in your pocket.


Of course, you yourself can come up with the design of this stand, decorating it with drawings, wood burning, and many other different ways!

Thanks to the author for the simple idea of ​​a gadget stand!

If you have interesting homemade products, share them on this site. Here you will get a real reward, not a “bunch of green stuff" at the entertainment forum.

All good mood, good luck, and interesting ideas!

Author video can be found here.
8.3
8.3
6.5

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
1 a comment
You yourself can come up with the design of this stand, decorating it with drawings, wood burning, and many other different ways!
For example, having scribbled with matyuki and calling, for example, a type in folk style - crap! xaxa

We advise you to read:

Hand it for the smartphone ...