In order to make a soap dish out of a plastic bottle, we need the bottle itself (preferably kefir, but for lack of it, an ordinary one from under the water will do), a sharpened knife (an ordinary kitchen one will do) and a superglue or glue gun.
So, the raw materials for the production of soap dishes are ready, the tool with which we will do this, ready to start. To begin with, stepping back from the bottom of a plastic bottle two centimeters, cut it with a sharp knife.
We also cut off the neck, where it directly goes into the main part of the bottle.
We got a plastic, divided, as seen in the photo, into rings, a cylinder. By the next step, we cut off at the cylinder two extreme rings, one on each side.
We make, from cut rings, the legs of the future soap dish - for this, we reduce the sides of the ring to each other and bend into a pretzel shape.
When the legs are ready, we will make a soapy bed - for this we cut the cylinder, obtained from a plastic bottle, along along two sides.
The blanks are ready, now just connect them together. To do this, apply glue to the bottom of the soap bar on one and the other side and glue the legs to it.
Soap dish is ready.