Halloween is very close, so we are in a hurry to please you with one more material, which is also devoted to the theme of this holiday. Today we will be watching a video on the manufacture of vampire fangs without much time and money.
Before proceeding with the manufacture of fangs, we suggest taking a few minutes to watch the video, after which we will together consider how to repeat the process.
[media = https: //www.youtube.com/watch? v = iAb6KaznVj8 & list = UUyUppWKbVCNBuv7zo8V7zWA]
What we need:
- four plastic disposable forks;
- scissors;
- lighter;
- a hacksaw for metal.
Just note that exclusively all the tools are present in every home. If for some reason you don’t have a hacksaw for metal, you can freely replace it with a stationery knife. Let's get to the festive homemade.
First of all, we need to cut the forks from the convex part on the back side over the teeth. We’ll no longer need fork handles.
Next, we take the scissors and carefully cut the teeth of the first workpiece. From this blank, we need a base of teeth, which also needs to be separately aligned so that the lateral convex parts do not interfere with our mouths.
We pass to the second workpiece. We cut off three cloves, leaving the leftmost one, which we will need intact. Again, do not forget about the alignment of the lateral convex parts.
On the third workpiece, we leave the extreme right tooth intact, and cut off the remaining three. We align and get exactly what we need.
With the fourth workpiece, you need to do the same as with the first, that is, cut off all the teeth and smooth out all the bumps.
Now you need to assemble the structure into one. To avoid unnecessary problems and protect yourself from possible poisoning by chemical elements of any glue, the author advises using the most ordinary lighter. That is, we need to fire slightly melt the plastic and glue everything together. The most important thing in the gluing process is to get a slightly round shape so that the fangs hold well in the mouth. First of all, we take workpieces with teeth, slightly melt and connect with each other.
Further, using the same technique, we melt and attach the extreme workpieces, that is, those on which we did not leave the teeth.
In the end, we thoroughly burn the entire structure except the fangs. This is necessary in order to completely get rid of the sharp parts that can injure the gums.
Our fangs are ready. Have a nice holiday.