Good day, today I want to bring to your attention the adapter "Phone - speakers or Computer - speakers"
To make the adapter we need:
• 3.5 connector
• 3 core wire (I’m taken from an old mouse)
• 2 Tulip Connectors
• Soldering iron and soldering accessories
We collect everything that we need and can proceed to assembly
We disassemble our plug and tin the contacts on it
We clean our contacts, connect common contacts, tin, solder, isolate each contact separately from each other.
I connected two wires from the mouse cable to one, since we need 3 wires and 4 in the cable.
Similarly from tulips, two copper wires into one, this will be a common conclusion.
Now we connect, in my case, white and blue it will be common, we connect to the common which is tulip copper. I connected an orange to one of the red tulip wires, the green of which is from the mouse cable to the other red tulip lead.
I specifically connected in different colors in the picture so that you are not confused.
That's what happened
Now we go to the final part, take our already tinned 3.5 connector and solder wiring to it, collect the ready-made connector
For reliability, you can still fill our connector with silicone or glue, then he will not be afraid of any mechanical influences
Actually that's all, our adapter is ready)
We connect and enjoy the music)
Thanks to all)