First, I want to show you a video of this homemade:
[media = http: //www.youtube.com/watch? v = GlgdXP0rvDE]
Everyone is familiar with a situation where the tube of toothpaste ends, but there is still paste and you are standing and trying to squeeze the paste onto the brush with the help of your physical strengths. If the tube is plastic - this can still be done somehow, but then when the tube is iron or from another material, then squeezing out the remaining toothpaste is quite difficult, but throwing it away - why? You need to save) And today I decided to tell you about how I myself can home conditions to make a “squeeze” of toothpaste, that is, a device that will help you squeeze out absolutely all the toothpaste from the tube. By the way, this device can be used not only with tubes of toothpaste, but with any other tubes of absolutely any content.
We will need two small dense tubes (they can be made of any material). As an option, in this homemade product we will use an ordinary felt-tip pen, or rather two. So, first you need to free the felt-tip pen from the "insides", that is, remove the cap, pull out the rod, writing part and we will only get the main part of the felt-tip pen without the "insides". We perform this operation with two of our felt-tip pens:
Further, both of these markers need to be cut into two equal tubes, as this is shown in the photo:
You can cut the felt-tip pen with a hacksaw or an ordinary knife (this is quite simple, the main thing is to follow safety rules so as not to get hurt). The length of the cut-off marker is determined by ourselves, based on the width of your tube.
After that, you need to connect these two tubes made of a cropped felt-tip pen, and fasten them together with ordinary stationery rubber bands, as shown in the photo:
Our device for squeezing the contents of the tube is ready! It will perfectly help you squeeze absolutely everything out of the tube and help you save:
