This option is perfect for the lucky owners of a ceramic grill like Big Green Egg and the like. In addition, it is easy to use as a workbench or island in the kitchen. In general, this is a rather unique piece of furniture, which is sure to find worthy application.
Of the advantages, we can especially highlight good ergonomics and low cost of production. It will depend primarily on the choice made in favor of a particular type of tree from which the future product will be made.
The only thing you need to clearly calculate the frame of the future stand for a ceramic grill. This is due to the fact that in the middle of the countertop, large rounded holes corresponding to the diameter of the grill will be made on top and on a shelf below.
In general, from the materials for the work necessary:
- countertop,
- timber (can be unprocessed),
- screws or nails.
From the tools you will need:
- a circular saw,
- jigsaw or special woodworking carpentry tool.
When all preparations are completed, you can safely begin work.
Stage one is the manufacture of support legs.
They must be fairly strong to support the weight of the ceramic grill. Therefore, it is better to do them as shown in the photo below.
The legs made in this way will allow the product to withstand a very large weight and will last quite a long time.
Also in this photo you can see that the grooves inside the sides were reduced.
The second stage is the most difficult. Here is the work to make the upper part of the future product.
For accurate drawing of the center, you can use a homemade router, as in the photo below.
At the third stage, the lower shelf is to be manufactured. Please note that the bulk of the ceramic grill will be on it.
Therefore, it is necessary to secure it in the grooves as firmly as possible. They are most conveniently done with a circular saw.
But first we must remember that any ceramic grill like the Big Green Egg is heated to very high temperatures. It is quite problematic for a tree to restrain such heat.Therefore, with the help of a carpentry tool, another circle was made on the lower shelf for installing a circle of stone.
It is already visible here that the work process is gradually coming to an end. It remains only to carry out wood processing.
This can be done with a special composition such as stains or natural wax for wood.
So the stand for ceramic grill is ready.
