» For pets DIY flower birdhouse

DIY flower birdhouse


When you have trimmed boards in your arsenal, try using them to create a decorative flowerbed with a birdhouse for two "owners".

Tools, materials, and equipment:
- Trimming boards;
- Nails for decoration;
- Glue for carpentry;
- Drill with drills, the diameter of which is 1.5 and 0.9 cm.


The main details of the structure

We will use boards for the construction of the pediment and the bottom 140 mm wide and 660 mm long.

Saw the board into parts

We cut 4 equal parts, then cut 2 of them for the rear and side parts of 19 mm.


We compose a birdhouse

We connect the details of the walls with glue and knock down with finishing nails for greater strength.

Flower bed frame


Attach the bottom

Cut the bottom part with nailing, leaving 3 mm on all sides. For drainage, we drill a hole with a diameter of 6 mm from the sides.

Collect the roof

We install the roof on the hinges to simplify the cleaning of the birdhouse.

Drill windows for starlings

We make a window with a diameter of 40 mm. We make a window at a level of 150-230 mm from the bottom. At the back of the wall we drill ventilation holes.

Install on a bar



Now it remains to wait for new residents.
2
10
10

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...