Many played the famous computer game Far Cry, the creators of which presented hallucinogenic luminous mushrooms. This article will provide an overview of the video on the hand-made production of such mushrooms for decorative purposes to decorate a room or land.
Let's start by watching the author’s video
So we need:
- glue gun;
- cling film;
- wires;
- food coloring;
- LEDs.
First you need to pull out thinner wires from the wire.
Pulled out wiring must be divided into small pieces.
We tear off a small piece of cling film, put it on the table and pour food coloring.
Pour a small layer of hot glue and mix well.
We put two wires in hot glue.
We fill up some more dye and forget with hot glue.
Once again, mix everything thoroughly, after which we wait 10-20 seconds for the glue to become warm and turn the leg of the future mushroom out of the plastic wrap.
We connect one LED to the wires that come out of the legs and fix it with a drop of hot glue, also providing insulation of the contacts.
We test the correct connection with the battery. If the LED lights up, then everything is connected correctly.
We make the mushroom hat almost as well, but when mixing and final shaping, you need to put the future hat on a suitable shape. The author uses an old CO2 can for this. Excess film can be removed.
We take the LED, which is connected to the leg of the fungus and gently break the upper part with the cutters so that it breaks off. This is necessary so that the distribution of light is slightly better.
Now with the help of hot glue we connect the mushroom cap and the base.
Thus, we make as many mushrooms as necessary.
The final result can be attached to the bark from the tree, as the author does. To do this, take the bark and make a hole for mushrooms on it.
We insert the mushrooms with wires into the drilled holes and give them any shape, fixing on the bark with hot glue.
The wires remaining behind must be connected in the correct sequence.
You can also lightly light the mushroom caps on top with a lighter, giving them a more believable tint.
Finally, connect to the power source and enjoy the result.
