» Equipment » All terrain vehicles » Tracked »Tracked all-terrain vehicle" Tramp "

Tracked all-terrain vehicle "Tramp"


Tracked all-terrain vehicle "Tramp" Created to plow through fields and mountains, along rivers and swamps, along forests and copses. And the owner of this tramp, a travel lover, Vasily from the city of Belomorsk. Karelia is the land of thousands of lakes and without a good helper it is difficult to travel here. Vasily has his assistant, a crawler all-terrain vehicle-amphibian "Tramp".

In the spring of 2013, he began construction his all-terrain vehicle.

Here's what came of it. Vasily’s dream embodied in metal.

And where it all began. Of course, from a dream ...
Realizing your dream.
For starters, it was only
Engine VAZ-2108 -1.3
Gearbox (gearbox) VAZ-2101 four-stage
Bridge VAZ-2101, without handout
Front-wheel drive, without suspension
Differential rotation through locking the hub with a disc brake.

An all-terrain vehicle body was built.

Caterpillar tape.

Ready caterpillar. Caterpillar width - 450 mm, sprocket consists of 10 teeth, tooth width 50 mm,
tooth height approximately 50-60 mm.

The boat is welded, time to put the engine.

Engine installation.

The bridge is assembled and installed.

To reduce the weight of the all-terrain vehicle when sheathing, sheets of corrugated aluminum are used.

Installed engine and wings added.

Sheathing the front of the boat.

Put a track on both sides.

To reduce the number of revolutions transmitted from the engine to the propulsor razdatka applied.

The fan for continuous blowing of the engine.

The fan is attached to the generator mounting bracket. Drive from the crankshaft pulley. The belt is pulled by the generator.

Track tension mechanism

Work with electrical wiring.

Additions to the skin.

General form.

The first exit.



Improvements to the braking system and then run-in.



Made a hood on the engine.

It closes tightly and beautifully.

Cabin trim started.

It takes on a more or less finished look.

For trailer provided.

Seats are passenger.

After running in.

The trunk is ready.

He closed the back, added lights.

Dashboard.

Night view.

Dimensions

Cooling system.


Diffuser for radiator.

All terrain vehicle already brought to mind and runs fine.



You can admire.Dreams Come True.
0
0
0

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
5 comments
A very high degree of risk, falling under the tracks of their own "brainchild". I will not write about the all-terrain vehicle, it has long been flashed on the Internet. Tired. But the inventor’s yard, unlike home-made, leaves much to be desired. Hands that is, and it seems to grow correctly.
Can I find out what sizes this all-terrain vehicle has?
Of course, "fooling" a speedometer or hour meter on such an all-terrain vehicle is pointless. But you can put some GPS tracker (preferably with speed fixation), now they cost a penny. As a result, you would have complete statistics on the use of your "beast."
Author
Aluminum sheets are attached to the body using metal screws. And the resource of homemade tracks depends on the intensity of the loads, but since there are no speedometers in all-terrain vehicles, no one can say for sure.
How were the aluminum sheets of the case fastened - with rivets or bolts (the quality of the photos does not allow to determine this “by eye”)?
Also interested in the resource of homemade tracks. Kilometers 500 - 700 they stand?

We advise you to read:

Hand it for the smartphone ...