You already saw a lot homemadewhere huge cable reels turned into unique things. We present to your attention another master class on creating an original barbecue table. Turning a coil into a table is not at all difficult, and the time you spend with your friends behind it will be remembered for a long time. After all, sitting at such a table you will be able to cook and at the same time communicate with your loved ones.
To make this homemade product you will need the following materials.
Materials
• BBQ;
• cable reel;
• BBQ;
• Stain;
• Varnish for wood;
• Jigsaw;
• Pencil;
• brushes;
• Grinder;
• Flaxseed oil
• Boards
Step-by-step manufacturing of homemade products
Step 1.
First you need to inspect the coil and clean it of dirt (if any). After that, use a grinder to clean the entire surface of the cable reel. If you do not have a typewriter, then this stage of the work can be performed using sandpaper. If the boards at the coil are damaged or broken, then these parts must be replaced, and then sanded.
Step 2
Take a barbecue and based on its size, put a markup on the reel.
Step 3
After you have marked the countertop, you need to cut a hole. The shape of the hole can be absolutely any, depending on what kind of barbecue you have. Please note that the cable reel has threaded rods in the amount of 4 pieces. Be sure to tighten them before starting work. All nuts should be tightened very tightly, this will give the coil stability. Now you need to cut the middle along the marked lines. In this case, the iron rods of the coil should remain on the outside of the circle.
Step 4
Be sure to work on the cut edge, for this use sandpaper or a grinder.
Step 5
Now take linseed oil and treat the entire surface of the cable reel. Leave to dry completely for one day.
Step 6
After the coil dries well, it must be painted with varnish.The best option is if you apply 2-3 layers of varnish. If you want to give the table a color, you can pre-coat it with a stain. Choose a shade to your taste.
Step 7
Now that the preparation of the table is complete, you need to insert into the cut hole of the barbecue. Before this, cover the edges of the barbecue with food foil. The foil will not only protect the edges of the table from increased temperature and burnout, but will also enable the barbecue woman to stand firmly on the previously prepared place. So she will not hang out and will fit tightly into the groove.
That's all! A unique barbecue table is ready. Do not wait for a miracle - go it yourself and surprise your loved ones.