» Furniture » Tables and chairs »Do-it-yourself bar table of beer bottles

DIY beer bottle bar table


If you have accumulated a large number of beer bottles, then do not rush to throw them away. We present to your attention a very interesting idea for creating an unusual bar table. Such a table will certainly surprise your friends.

To make this homemade You will need the following materials.

Materials
• Beer bottles (27 pcs.);
• Epoxy glue;
• Wooden board (diameter 46 cm);
• Cardboard
• Garland;





Step 1.

The first thing to do is get rid of the labels on the bottles. For this, the prepared containers must be soaked in hot water in the bathtub. You can add detergent. So the labels will move off faster and at the same time all the bottles will be perfectly cleaned of dirt. After that, all the bottles must be well dried.

After that, you need to make the base of the table. To do this, take a few bottles and glue. Add the required number of bottles to the shape you have outlined. The best option is a triangle, but you can do an experiment and come up with your own shape.


Step 2

After you have collected the base, let it dry. Let's take the 2nd level. For the second floor, a little less bottles will go. Also glue all the bottles together and let this design dry. After the 2nd level has dried out, it must be connected to the base. To do this, turn the bottles upside down and connect them to the 1st level. You can not add glue, but you decide for yourself if you understand that the structure is unstable, it is better to put a little glue on the neck.



Step 3

If you want your bar table to glow in the dark, then carefully lay a garland around the base of the table.



Step 4

The third level is done, similarly to the 2nd. But here be sure to grease the entire base with glue. This is done so that they will be attached with their nails up. Now you need to install the tabletop. Cut the shape of the lid in advance from the prepared board. Now coat all the little pieces with epoxy glue and install the cover. In order to perfectly cover the table top with the base, put a load on top. Let the glue dry well.




Here is such a cool bar table that will delight not only you, but also your friends.


Step 5

You can use bottles of various colors or garland around a central level.

Experiment, and you will succeed!
0
0
0

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...