Crayfish catching is not a complicated process and quite interesting. For these purposes, you will need such tackle as rachevnya, it can be made without problems do it yourself. In the simplest version, a ring made of steel wire is used, on which the mesh is stretched. On average, the diameter of the ring is about 50 cm. But the drawback of such a spasm is that it needs to be checked very often, since the crayfish, having been saturated with bait, simply leave it. The author has proposed a variant of simple racheviya, which can be left overnight. Since the cancer that fell into such a trap, simply can not get out of it. This will be possible only if the trap overflows with crayfish.
Video how to make a do-it-yourself raking
[media = https: //youtu.be/4UKr6to8e7A]
Materials and tools:
- a grid with a small cell;
- plastic clamps;
- wire (4-6 mm in diameter);
- kapron thread;
- scissors;
- wire cutters and other tools.
The process of making horseradish
Step one. Creating a trap framework
Steel wire will be used to create the "skeleton" or base of the trap. You need to make two rings, the bottom should be about 40-50 cm in diameter, and the top about 15-20 cm. To connect the rings at their end, you can form hooks and then squeeze with pliers, thus forming locks.
Step Two Mesh mount
Now you need to attach the mesh to the largest lower ring, thus creating a bottom for the raking. For fastening, you can use either plastic clamps or a nylon thread. It is better to take the mesh with a margin, since the remaining part should still be enough to make the walls of the trap. The height of the trap will be about 12-18 cm.
Step Three Spacer Installation
For the manufacture of spacers, electrodes with a diameter of 3 mm are perfectly suitable, it can also be a wire. All spacers should be the same length. At the same time, their size must be calculated so that the upper ring is centered above the lower one at a height of about 12-18 cm.
For convenient transportation, the trap can be made folding.For these purposes, one spacer is made removable, and the other two are fixed by the method of ring formation.
After the base is fully assembled, you can proceed to create the walls of the trap. To do this, the remains of the mesh are stretched and attached using clamps or kapron threads to the upper ring. You need to grab the grid in increments of 1-1.5 cm. Now it only remains to trim the excess material and you can start fishing.
The principle of such raking is very simple. The bait is put in it, it is best to use fresh fish. Experienced fishermen have noticed that crayfish prefer fresh fish rather than rotten fish. Still as a bait, a piece of cake, rye bread, as well as dill, is great, it should be tied in a bag.
Cancer smells and begins to climb on rakolovka. But to get to the bait, he needs to go through the top hole. When he falls into the rakolovka, then by no means can he get out of it. Thus, such tackle can be left overnight, and then only harvest in the morning.
The indisputable advantage of such a urethra is its simplicity, a minimum of materials for assembly, as well as ease of use and efficiency.