Cordless Kids Skate

This article will discuss how to make a rechargeable skateboard for the smallest family members.

Tools and materials.
Plywood sheet;
Corner;
Wheels
Reducer from a children's car with a motor;
Anti-slip material;
LED Strip Light;
Wires;
Battery;
Housing from uninterruptible power supply;
Control button;
Drill with a set of nozzles;
Electric jigsaw;
Screwdriver, wrenches;
Riveter;
Fasteners;
Glue;
Sandpaper.

First, the author on the plywood sheet draws the supporting part of the skate. Cutting out processes it from the burrs using sandpaper and a grinding wheel.
Next cuts the pedals. Processes, polishes.
Cuts two pens from plywood.
Cuts the front axle. After processing, from two sides at an equal distance with the help of a riveter fastens two corners. Screws the wheels to them.
On the supporting part of the wheel are mounted in this way. Equally spaced on both sides, mounts a wheel on the right to the corner, on the left a gearbox with an engine and a wheel.
To control the movement left-right, the skateboard consists of two parts. Supporting (motionless) and movable front axle. The author connects them with an M8 bolt.
Screws the pedals to the front axle, strengthens them from behind with a corner of plywood. Fastens the handles. On one of them sets the control button. Glues the supporting part and pedals with anti-slip material. Sets the backrest. Behind the back, the battery is installed, having securely fixed it. Glues an LED strip on the end of the skateboard. According to the scheme, mounts electrical equipment. It covers the battery cut across the body from the uninterruptible power supply. The skateboard is ready. To set it in motion, you must turn on the power with the button on the battery cover. Then, by pressing the button on the handles to bring the engine into operation, the skate begins to move in a straight line. In order to turn it in either direction, the child must turn the front axle by pressing on one of the pedals.