» Fixtures »Leather do-it-yourself knife case

DIY leather knife case


In this master class we will make a leather knife case. Such a cover can be made by yourself at minimal cost. He will not only protect your knife, but also give it a unique look.

Necessary materials and tools:
- a piece of leather
- epoxy adhesive
- rivets
- double sided tape
- a pen
- paper
- scissors
- waxed thread
- stamp for stitching

Detailed manufacturing description:

Step 1: To begin with, we will sketch our knife on plain paper. To do this, circle the handle around the knife and make a further sketch.


Step 2: Leaving a place for leather stitches, we do a scan.


Step 3: Next, from the skin of your choice, you must cut the workpiece.


Step 4: In order for the cover to keep its shape in the places of the handle, we fix the skin with a rope.



Step 5: Using a stamp we make a line for seams.


Step 6: Next, using double-sided tape, glue two parts of the sheath together. In order to slightly increase the height of the cover on one half, we fix the layer.



Step 7: Using waxed thread, we completely sew the knife cover. We cut off the excess.


Step 8: Further, in the places of the leather handle, we will make the facial design.


Step 9: We glue a piece of leather with double-sided tape and stitch it with waxed thread.



Step 10: We cover the seams with epoxy.


Step 11: Next, we make a rivet for the cover. To do this, make a hole, fix the rivet and stitch it.




That's all the leather knife case is ready.
8.5
8
8.2

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
3 commentary
If soft leather is used for the sheath inside the cover, a strip of some plastic can be inserted inside the cover.
Your case turned out to be very neat, has a salable appearance! Thanks to your article, I found out about epoxy, otherwise I still could not understand what the seams are processed with!
By analogy, I made a case-cover for a mobile phone, leather things are very expensive, and in the bins, each of us will always find a leather thing that cannot be lifted by the hand, so it came in handy for me! But in my work I got a slip, the decoration of the case should there was a rose made of leather, but she doesn’t want to hold on. Tell me, who knows what kind of glue “tightly” attach my accessories?
The necessary master class. It is for me. Since I am a big fan of picnics on the lake, in the forest. Often the storage and transportation of the knife is problematic. I watched the case more than once, but there is no size for my knife, as it was produced at the factory (shabashka). The case is well made, but I will still make a hard insert.

We advise you to read:

Hand it for the smartphone ...