Materials
1. block 200x400x4200 (12 pcs)
2. beam 40x40
3. 30 mm board
4. lining (pine)
5. plywood
6. soft roof
7. galvanized nails (for roofing)
8. wood screws
9. nails
10. roofing material
11. paint
12. glass
13. rail
Instruments
1. gas generator
2. drill
3. jigsaw
4. hammer
5. screwdriver
6. hacksaw
7. level
8. pencil
9. roulette
10. spade
The process of building a children's house do it yourself
And so it was said above that for the favorable development of the child's body, clean air and sun are required, as well as a playground or a house located in the courtyard of the house. First of all, you should choose the sunniest place on the site, but at the same time there should not be a through wind. After the place was chosen, the author began construction. The children's house will be of lightweight frame construction and the roof will be covered with plywood. The foundation of the house will be blocks 200x400x4200 located around the perimeter, logs are laid on them and fastened with a beam.As soon as the basis for the house is ready, the author proceeds to the erection of walls, first the beam is installed and fastened.Then the master collects the entire frame and that's what he gets.After the frame is assembled, the caring father proceeds to the wall covering with plywood, the roof is also finished with the same material.Then the roof is covered with a soft roof, it is best to use special galvanized nails for roofing.Subsequently, the finishing of the children's house was made, as well as decorative elements were applied. Inserted and glazed windows, in the house and in the attic.Here is such a wonderful children's home, a caring father built his beloved children.Now children can easily play and frolic in their own little house, as well as there you can relax and sleep in the fresh air.
This concludes the article. Thanks for attention!
Come visit often, do not miss the latest in the world homemade!
This article is for informational purposes only!