Hello everyone and in today's article I will show and tell you how to make a spotlight.
Video:
[media = http: //www.youtube.com/watch? v = LzxWMGdEC2Y & t = 19s]
First we need:
• 18650 batteries (you can take others)
• LED Strip Light
• Voltage transformer
• Iron cap
To begin, we cut the LED strip, 10 cm each. I get 6 of these plates.
Next, I attach it to the iron cap, if it will come off in the future, you can stick it
on super glue and solder (in parallel).
After that, I make all the necessary holes with the “Christmas tree” drill (It is possible for others, it’s just more convenient for them to work). I insert the toggle switch. And I solder everything.
We mount the voltage converter on a double-sided tape (be sure to set it to 12V).
By the way, I advise you to purchase such a plug (very convenient to use). Also fasten to the body.
And, I also forgot, I need to solder the input "Mom" to the output of the converter.
We take the batteries and solder them sequentially to get 7V. I do not recommend soldering the battery, but I myself did not have spot welding.
Now we are calculating the power. All you see in the picture.
Well, that’s it. Floodlight READY. It can also be used as an on-camera light.
For 300 rub. , we get a good camera light!