The device is a Control Panel (a converted remote from the TV) and a Controlled Device (Radio Relay, up to 16 points per remote).
A radio relay can be built into a finished device (floor lamp, chandelier, etc.) or be in the form of a finished device connected to a power gap.
Technical characteristics of the controlled part
Supply voltage: 220 V (50-60 Hz).
Switching voltage: up to 240 V (50-60 Hz).
Maximum load power: 1540 watts.
Range (depending on the remote control): 10 ... 50m.
Operating ambient temperature, C: + 10 ... + 55.
Overall dimensions, LxWxH, mm: 60x45x25.
Control Panel Specifications
Supply voltage: 3V (2 AA elements).
Range (depending on the remote control): 10 ... 50m.
Operating ambient temperature, C: + 10 ... + 55.
Overall dimensions, LxWxH, mm: 157x65x19.
Control up to 16 channels, turn on / off.
The device allows you to independently program (bind) a controlled radio relay to the remote control. thus, you can add the number of managed objects of interest on your own.
When turning on the radio relay in the network, it is enough to keep the programming button pressed for 3-6 seconds until the characteristic double "beep". Then the diode will light up indicating that the device is ready to save the remote control command. By clicking on the button We are interested in (we hear a triple “beep”) we keep the connection between the radio relay and the remote control. In this way, we bind a specific radio relay to the selected button on the control panel.
Attention!
The device is designed to operate on a 220V network, therefore, when mounting / disassembling it, as well as using it, it is necessary to observe safety rules in order to prevent electric shock.