Arriving at the house, they asked: Where to sleep?
Of the materials were only: An air mattress, a classic folding bed, a temporary bed from the wardrobe left by someone on an abandoned site. Nobody wanted a big repair, so the author decided to make a bed.
so as not to be mistaken with the marking, he made a drawing on paper. He also tried on the number of fasteners.
He took the design from the existing bed. (This is because this frame was very light).
Made this homemade from a frame, mattress and hardboard. Then he made a border to hide the mounts.
The frame is made of 8 different parts.
The author himself made the basis of several edges stitched with 2 sheets. (The size is selected as follows: 10 mm. More than the mattress, if not, then the last part will pop up like the author).
Then he installed ribs that gave strength to the homemade product itself. Everything is arranged in a chess order, so that there is excellent access to the fastening of the same edges with screws. (2 screws on one side).
The next row is needed to limit the mattress, and it also covers the screws on the main body.
Cover the upper part with hardboard. According to the author, it is advisable to take a whole piece with small holes of 50-70 mm. for ventilation of the mattress.
Specification Example:
Part Number Name Quantity
1 Sheet of chipboard 1600x255x17 2
2 Sheet of particleboard 1966x255x17 3
3 Sheet of chipboard 775x255x17 14
4 Sheet of chipboard 1634x255x17 2
5 Sheet of chipboard 1600x255x17 2
6 Self-tapping screws 124
7 Hardboard 2000x1600 1
8 Mattress 2000x1600x170 1
In general, this is the end. Now you can lay the mattress and cover it with bedding.
The author thought that he would have this option temporarily, but after finishing work, he decided to bring this homemade work to mind.
Thank you so much for reading my article. I hope she helps you!