In the midst of winter, it's time to think about summer and summer fun. In this article, we will consider how to make a water gun with an electric pump.
Tools and materials:
-Glue gun;
-Knife;
-Drill;
-Plastic bottle;
- Submersible pump 12V;
-Battery 9V;
-Power button;
-Silicone tube;
- PVC pipe 32 mm;
- PVC tee 32 mm -3 pcs.;
- Plugs - 4 pcs.;
- Elbow 90 degrees;
- Elbow 45 degrees;
-Insulating tape;
-Wire;
Step One: Bottle
For his water pistol, the master took a 3-liter plastic bottle. A hole is drilled in the bottle cap.
Step Two: Water Pump
Slices a piece of PVC pipe. It has a cutout on the side. He puts the pipe on the cork and glues it with hot glue. Then it installs the pump into the tube by entering the hole in the plug. Seals with hot glue.
Step Three: Assembling the Gun
Assembles a gun, as shown in the photo below.
Step Four: Silicone Tube
Drills a hole in the tee. A silicone tube extends into the hole. One end of the tube is put on the pump outlet. A nozzle is installed on the other end. Drills a hole in the plug. Inserts the nozzle into the plug hole.
Step Five: Connect
In the handle, drills a hole and sets the button. Connects the pump, through a button, to the battery. He hides the battery in a pen and installs a plug.
The water gun is ready, it remains to pour into a bottle of water.
The whole process of manufacturing a water gun with an electric pump can be seen in the video.
[media = https: //youtu.be/fxGAZ6gY6sg]