Bird lovers can buy a cage and a bird, or you can make a window feeder and observe the behavior of birds through the window. It was such a feeding trough that the Master made.
Tools and materials:
- Suction cups with mount;
-A circular saw;
-Milling machine;
-Boards;
-Drill;
- Clamps;
-Plywood;
-Chisel;
-Glue;
Step one: procurement of parts
From the board cuts the parts for the housing of the feeder.
To connect the parts makes a groove.
Cuts side walls.
From the planks of the old chair makes the crossbar.
Step Two: Mounting Holes
In the walls of the feeder makes holes for attaching suction cups.
Step Three: Assembly
Assembles the body by lubricating the joints with glue.
Then he polishes the feeder and removes the edges.
Step Four: The Roof
The master decided to make the roof of plywood covered with wood chips. cuts two pieces of plywood and fixes it on the feeder.
Chips chips from a wooden bar.
Fastens chips on plywood.
Covers roofs.
Step Five: Installing the Feeder
The feeder is ready, it remains to install it in place and pour food.
