In this article, we will consider how to make a wall panel to suspend the TV. Wires are hidden inside the panel, and the perimeter is highlighted with an LED strip.
Tools and materials:
-LED Strip Light:
- Joiner's glue;
-Plywood;
Bracket for TV suspension;
-Socket;
-Installation box;
-The wire;
-Circular Saw;
-Milling machine;
- Cable pulling;
-Level;
- Clamps;
-Tester;
-Laser level;
-Knife;
-Scanner for finding wires;
-Drill;
-Pencil;
-Gon;
-Furniture edge;
- Trimmer;
-Iron;
-Grinder;
-Paint;
- Roller;
Step One: Material Procurement
Cuts plywood sheet to size.
From plywood cuts slats for the frame.
Makes a French suspension.
Step Two: Frame
Of the rails makes a frame. Fastens the frame to the panel with wood glue and screws.
Step Three: Edge
Using an iron glues the edge. Trim its edge.
Step Four: Install the Gimbal
He makes markings on the wall and fastens the trims with a French suspension.
The second half of the suspension is fixed to the panel.
Hangs the panel and check the strength of the suspension.
Step Five: Mounting Plate
Screws one part of the mounting plate to the TV mounting nuts
and the second part to the panel.
Cut a hole for installing a wall outlet.
Step Six: Painting
Paints the panel with white paint.
Seventh step: wiring
Cut holes in the wall. Extends the cable and TV cable through the holes.
Screws the wire to an outlet.
Checks the tester for the correct connection. Screws the socket.
Step Eight: LED Strip
On the perimeter of the frame glues an LED strip. The tape has RGB and is controlled via WIFI through the phone.
Now it remains to hang the TV, connect to power.
All is ready.
The whole process of manufacturing the panel can be seen in the video.