In memory of my brother and his friends, I created the project “Memory”.
According to my project, this is the second model.
This model will be a model of the MiG-19 aircraft. But not a copy.
The first was a model of the Su-06 "Cobra".
These drawings were taken as a basis.
Materials
Plate heater "Penoplex" size 1600 X 600 x 100 mm.
The ceiling.
Reiki wooden.
Plywood from fruit boxes.
Wooden rulers 50 cm.
Hardboard.
Clay "Titan"
Color and double-sided tape.
The model is 1275 mm long.
Wingspan - 900 mm.
The technology of cutting wings from Penoplex with an electric cutter was not yet familiar to me, and therefore each wing was made manually.
The torment on processing and tightening the wings is over.
On the wings made aerodynamic keels.
I had to tinker with the purchased chassis. They had to be shortened and adjusted to the diameter of the wheels. Additionally strengthened them with tubes from medical syringes.
The front desk is made on one board and has this kind of look.
On the bottom plane of the fuselage runs a ridge. The fuselage itself is made of a single piece of Penoplex.
The keel is adjusted with a pH.
The stabilizer is made fully rotatable.
Rear view of the nozzle.
Now we need to make a cabin.
The cabin was made from a plastic water bottle "Holy Spring" - very symbolic! I cut out the pilot and put him in the cockpit. It turned out very well.
Installed servos on ailerons, pH and PB.
Here is a small video. This is how the chassis release mechanism works.
Installed impellers ADH300L - 2 pcs.
Traction, of course, is not enough, but for lack of others, for testing, should be enough.
Battery 2200 3S.
Servos - NHT900 -2 pcs.
Regulators - 40A. - 2 pcs.
On the grass slightly dusted with snow, I spend the run of the model, I will test the engines.
Impellers create a very beautiful sound, similar to the sound of a jet engine. But traction is clearly not enough! Need to buy impellers with more traction.
This is how the model looks.
And this is me with the model.
These are photos of the model in the summer.
The model is waiting for powerful impellers.