Video on this homemadeif you are too lazy to read:
What could be more beautiful than cold winter evenings in the warmth? But how reluctant to go through the killing frost for firewood every time to throw firewood into the stove! Therefore, it is good to prepare for severe frosts in advance. Better yet, if you always have a “standby” supply of firewood in your house, so to speak, a “standby woodcutter”.
The duty woodcutter is a container for storing firewood at home. It becomes especially necessary in the winter. The woodcutter, in my opinion, should be portable in order to carry firewood without marauding clothes and just put firewood in it and carry away, and not run several times, dragging four woods to fill the woodcutter himself.
Tools and materials:
Plywood (10);
Galvanized iron sheet;
Two iron plates (20 * 200 * 2 mm);
Round wooden stick 50 cm long;
Two furniture handles;
Screws bolts and other trifle;
Drill drill in place;
Jigsaw;
Manufacture:
First step:
To start, I marked the side walls on plywood, and then sawed.
Second step:
Drank galvanized iron in size 520 * 670 mm.
Then he bent 1 cm from sides 520 mm long so as not to cut himself.
Third step:
He noted 30 cm from the sides (the edges of which were bent) and bent at an angle of 90 degrees.
Fourth step:
Bent the edges 1 cm and an angle of 90 degrees on each side.
Fifth step:
Screwed the side walls as in the photo.
Sixth step:
Holes were drilled on each side and inserted a tube there (1 cm long).
Seventh step:
He took the iron plates and drilled holes in them, and then screwed them to the sidewalls.
On the other side of the iron plates screwed a stick.
The eighth step:
I screwed the handles to the woodcutter.
