» Fixtures » Instruments »Screwdriver - a holder from a cartridge for a do-it-yourself drill

Screwdriver - do-it-yourself chuck holder

Hello dear readers and the inhabitants of our site!
In this article, the author of YouTube channel "Be Creative" will tell you how he made a universal holder - a screwdriver.

Materials
- Drill chuck
- Punch adapter
- Chisel handle
- Two-component epoxy resin.

Instruments, used by the author.
- Screwdriver
- Needle file
- Universal nozzle Gator Grip
- Bits.

Manufacturing process.
First of all, to make a screwdriver you need a drill chuck, for example, even a little unbalanced will do.


Now the author is screwing the adapter for the punch into the cartridge.


Squeezes the jaw of the cartridge, inserts a fixing bolt, and twists it into the adapter.





The author found such a chisel handle, he made a hole in it along the diameter of the adapter.




Then he mixed the components of the epoxy resin and applied it to the shank of the adapter.




It connects both parts of the tool, the shank is tight, it needs to be hammered a little.



That's all, the tool is ready to work. The first author installs a file in it.




Thanks to the weighty head of a screwdriver, it is very convenient to hold in your hands.




Now the author clamps the usual cross head - and it turns out a screwdriver.





Now the bigger nozzle is a universal bit for bolts.




The bolt with such a tool loosens quite well.




In addition to files and bits, such a holder can clamp small parts for processing.
Thanks to the author for the interesting idea of ​​a screwdriver holder!

Good luck to everyone, good mood, and obedient tools!
7
6.7
6.2

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
7 comments
Made a similar one (in the profile). Do not overjoy! I use it more often than I expected !!!))) As before, I could do without it ??? !!!!! )))
Guest Vladimir
someone like me and I liked it!
You torment the patron to wave! After all, there are special handles with a clip under the file, and for bits normal, light screwdrivers ... why these inventions, you would have used a turning chuck!
And I liked it...
It’s just that I have a lot of “screwdriver corpses” lying around in my box ... I’ve already remade them with lithium ... Anyway, I’m using a network ... I have three of them ... The cord doesn’t bother me much, but the network is more powerful and "always ready.")))
Part disassembled "for creativity" ... Cartridges are lying around - they are weak, if for drilling, I have more and are not self-clamping (pampering this)))) ...
You can stir up one at your leisure .. Not for screwdrivers, of course (this good is also enough))). But you never know ...
There are trimming short stainless steel rods. It is possible to sharpen from them three, tetrahedral "peaks", from one to make a powerful awl, from one - a threaded "corkscrew". It’s not enough that you will need to manually dig through the plastic ... All the same instrument, if you put it in a box ... Or stuff it into a box with my "multitool" ...
Author
But the armless partner can be given on the head punish
Too bulky for the needle file holder, I prefer jewelry vise (and for clamping small taps too). But the rest, a screwdriver is still better.
And I'm lazy, I took the finished handle from a screwdriver with a ratchet, it is convenient to cut small threads! smile

We advise you to read:

Hand it for the smartphone ...