Today I decided to tell you how to build a flying aircraft model on the radio control of WWII. Many aircraft models build models of aircraft of that time and most often, build our, domestic models. This time the author decided to show model Focke - Wulf 189, or, as everyone used to call it - “frame”.
During the Great Patriotic War, he was often used as a reconnaissance aircraft.
This will be a half copy model.
Dimensions of the model.
Span - 1300 mm. S wing = 19.6 dm 2
Length - 800 mm.
Weight - 900 gr.
For the manufacture of the following materials.
Ceiling tile (ceiling) - 4 mm.
Balsa - 2 - 3mm .;
Heater "Penopleks".
Plywood - 2.5mm.
Carbon rods.
Wooden slats, preferably pine.
Electronics.
Motors - FC2812 1543Kv - 2 pcs.
Regulators - 20A - 2pcs.
Servos - 929MG 2.2 kg. With metal gears.
Battery 2200 mah. 3S.
Here, according to these drawings, a model is built.
The author did not resort to the help of a printer and drew the model details himself on paper.
The basis of the model is the center section, on which the supporting beams are mounted with motors, stabilizer and keels.
The design of the wing mount, which has a V angle, is made.
For nacelles, frames and stringers are made, which are sheathed with a ceiling.
The most complex frame on which the chassis is mounted.
Motor nacelles are mounted on the center section.
Stabilizers and keels are made.
Motors and regulators are mounted.
Ceiling continues.
These will be the pH.
Servos, bowden for rods are mounted.
RV is hung.
Painting of the individual elements of the model structure begins.
Tail beams are sheathed in a ceiling.
For the manufacture of the wing used carbon rod, balsa.
As glue epoxy is used.
Ailerons are hung.
Wing consoles are checked and adjusted.
Wire laying.
We make a lamp for the fuselage cockpit.
Mount the flashlight in place.
There will be a battery.
Final cleaning of the model.
Hatches are made.
These are the hoods on the engines.
Painting of the model is carried out in accordance with the finished color scheme.
Painting of the aircraft model is done with water-based paint.
The model is ready to fly.At the competition, the model won 2nd place.
A few video flights of the model.