In this article, the author of the YouTube channel "Be Creative" will tell you about an interesting tool for processing wood.
Given device facilitates the bending of wood blanks.
Materials
- steel strip
- Tin clamp
- Steel corner, pipe.
Instruments, used by the author.
- Welding machine
- Vise, hammer
- Screwdriver
- Gas-burner.
Manufacturing process.
First of all, the author makes a holder from a steel strip and corner. Welds workpieces together.
Then it welds a pipe of suitable diameter to the corner.
Knocks the scale from the seams with a hammer.
Now an S-shaped strip is welded to the bottom edge of the pipe.
Sets fire to the burner.
Inserts the nozzle into the edge of the pipe, fixes the cylinder with a steel clamp.
For tests, the master soaked several wooden rods. Now they can be bent on the hot surface of the pipe. At the same time, the material will be dried.
These are the curly products obtained from the master.
Thanks to the author for a simple but useful tool for working with wood!
All good mood, good luck, and interesting ideas!