Of course, all of you like grilling and barbecue. But this is bad luck, on vacation almost always children show a special interest in the fire and barbecue.
In this article, the creator of YouTube channel “Creates DIY” will tell you how to solve this problem and show how to make a miniature grill for them.
Homemade is extremely simple to manufacture, and it can be done with a child.
Materials
- Tin Can
- Furniture hinge
- Stainless steel grill
- Screws, washers, nuts M4.
Instruments, used by the author.
- Marker, ruler
—
—
- Screwdriver, wrench
- Scissors for metal.
Manufacturing process.
So, to begin with, the master needed a tin can with pineapples. He removed the label and marked the center line of the can.
Now you need to cut it into two halves with scissors for metal, an open jar does not fit, the lid and bottom should be intact. Pineapples can naturally be eaten.
Then he tried on a furniture hinge to the blanks and drilled holes for it in the lid and bottom.
Using small bolts and nuts, I screwed the loop.
Now, in the cover of a barbecue machine, the author drilled a hole for the handle, and made it out of a screw.
The next step is to drill four holes for the legs in the bottom, and prepare long screws by tightening the nuts on them.
It remains to fix the screws on the inside with nuts.
The author made the grate, and the project was completed.
Now you can load charcoal, and kindle a mini grill.
Once the coal has flared up, you can stack a couple of sausages, and close the lid. It turns out pretty good! Such a miniature device can be used inthe garage or workshop. All the same, the smoke is much tastier than just boiled sausages or cooked in the microwave.
Thanks to the author for the simple idea of a miniature barbecue machine!
All good mood, good luck, and interesting ideas!
Author video can be found here.