This kit is designed to facilitate the installation or removal of terminals from connectors and will finally forget about the use for these needs of nails, needles, paper clips and other improvised materials. The connector remains completely intact, a slight scratch remains on the wire retainer. These extractors are suitable for most connectors. The material from which they are made is stainless steel. The sets include extractors of three types - for pins with one clamp, for pins with two clamps and for round pins. They are delivered by a bunch connected by a chain.
The sizes of the presented extractors are as follows:
• for pins with one lock: 0.8 mm / 1 mm / 1.2 mm / 1.4 mm / 2 mm (tip width);
• for pins with two clamps: 2 mm x 3.5 mm / 3 mm x 4.5 mm / 4.5 mm x 6 mm / 6 mm x 7.5 mm / 3 mm x 8 mm / straight tip + rounded ( internal distance between tips x external distance between tips);
• for round pins: 2 mm / 2.5 mm / 2.6 mm / 3 mm / 3.2 mm / 3.9 mm / 4.9 mm / 6.2 mm (diameter).
Such extractors will definitely come in handy both for people for whom working with automotive electronics is a daily task, and for those who are used to repairing their own electronics auto.
Cost: ~ 230