In this article, the author of YouTube channel "Be Creative" will tell you how to increase the working range of the C-shaped clamp.
After all, sometimes it happens that the gripping length of the clamp is not enough, and the details need to be fixed.
Materials
- C-shaped clamp
- steel strip
- Bolts, nuts.
Instruments, used by the author.
- Grinder, cutting disc
- Drilling machine, or screwdriver
- Vise
- Kern, ruler, vernier caliper.
Manufacturing process.
The author found such an old C-shaped clamp.
Without hesitation, the master clamped it in a vice and cut it into two halves.
Also found a suitable steel strip, and applied marks for drilling holes.
Then, using a drilling machine, he made two holes in the parts of the clamp, and six holes in the sebaceous strip.
Such parts have turned out here.
Using bolts with nuts, the author assembled a clamp for a short length.
Details hold very firmly.
Now he unscrewed the stubborn sponge and set it to maximum.
Everything is perfectly fixed.
Thanks to the author for an easy way to extend the clamp!
All good mood, good luck, and interesting ideas!